EN10204 Steel Grinding Chrome Rod 42CrMo4+QT

 42CrMo4 is a heat treatable steel which contains at least 0.9%Cr,0.15%Mo as strengthening elements. After quenched and tempered, It obtains high strength, good low-temperature impact toughness with a typical tensile strength of 900 -1200 N/mm2.42CrMo4 steel has better performance than 34CrMo4 steel due to the higher carbon and chromium content.Similar to AISI 4140,only a little difference in Mn,Cr content.This material also has good machinability,good wear-resistance,but the temper brittleness is not obvious,and poor in weldability.

CHrome rod 42CrMo4 is mainly used for hydraulic cylinder.The piston rod material 42CrMo4 hardened and hard chrome plated with the material number 1.7225 is suitable for heavy use and is especially wear-resistant thanks to its hardened surface layer with a surface hardness of 56–64 HRC.

The Advantages Of our  Hard Chrome Plated Rod 42Crmo4

1.Hard chrome plating means that an especially thick chrome layer is applied after the pre-honing and before finishing the honing process. The layer thickness depends on the rod diameter and has a hardness of more than 800 HV. Hard chrome plated piston rods can be used between -15°C and 200°C.

2.High quality raw material: our raw material mainly from some famous steel mills, such as TPCO, BAO STEEL, SHA STEEL, which are best and largest raw material manufacturer in China.

3.High precision:  Chrome Plated Rod, chrome layer 10 micron to 100 micron, strict tolerance ISO f7.

4.Strict quality control: we have professional in-house QC to inspect all products. We will do Chemical Composition Test, Mechanical Property Test, Dimension Inspect, Roughness Test, Chrome Layer Test and other tests in need before delivery.

 

Comments

Post a Comment

Popular posts from this blog

How to deal with the scratch on the surface of hydraulic cylinder barrel

Image
As we all know,In the process of using the  hydraulic cylinder , the hydraulic cylinder barrel will be damaged,it is common that there will be scratch on the surface of the  honed tube , some customers will ignore these scratches, this to us is not responsible for the cylinder, when a small scratches in the cylinder,we usually take some tips to deal with them. 1.First,  to clean up the oil on the surface of our hydraulic cylinder barrel, then we will use the grinder machine to the surface treatment of the scratched part of our cylinder, at this time we have to grind the surface of the cylinder wall out of swallowtail groove. Although we have cleaned our cylinder at the beginning, at this time we need to clean the cylinder barrel further. At this time, we use anhydrous ethanol to clean the surface of the scratch repair of honed cylinder barrel. 2. We usually use special  repairing adhesive  to solve the scratches on the surface of  hydraulic cylinder barrel ...
Read more

Heat Treatments Of Seamless Steel Tube

Image
Heat treatment of  seamless steel tubes  is a process to improve the properties of metal materials and their products. Depending on the use, the material and its workpiece are heated to the appropriate temperature, insulated, and then cooled in different ways to alter the internal structure to achieve the desired performance. Heat treatment of seamless steel tubes is generally divided into annealing, normalizing, quenching, tempering, failure, chemical heat treatment and vacuum heat treatment. By heat treatment, the efficiency or life of the steel can be improved, and in some cases, more expensive special materials can be used instead of cheaper ordinary metal materials. The basic heat treatment methods of seamless steel tubes mainly include the following four forms: 1. Annealing Annealing is a process in which a seamless steel tube is heated to a slightly higher or lower critical temperature for a period of time (ie, heat preservation) and then slowly cooled. Common annealing...
Read more

HOW TO REPAIR THE HYDRAULIC CYLINDER ROD

  Hydraulic cylinders can be repaired, but you should never attempt these repairs on your own. Although hydraulic cylinders have a simple design, you must be familiar with them in order to efficiently repair them. When a technician performs hydraulic cylinder repairs, they take the entire mechanism apart and reassemble to find the root cause of the issue. COMMON POINTS OF HYDRAULIC CYLINDER FAILURE There are several common points of hydraulic cylinder failure. These include the piston, cylinder rod , seals, and head. PISTON The pistons in hydraulic cylinders are one of the most common points of failure. This is especially true in light-duty applications. The pistons used in light-duty applications are often made from aluminum, which wears out much more quickly than the steel used in heavy-duty applications. When checking pistons for failure, technicians will often measure the diameter of the piston. The piston’s diameter in relation to the bore directly affects the amount of hydra...
Read more