Datong Hydraulic

 SAE 4140 steel can be used in a ready-made semi-hardened ( quenched + tempered ) state. Its hardness is in the range of 28-32 HRc. It is a material known as tempering steel in the industry, which can be used in hydraulic cylinder shafts , gears, and machine parts working under high tensile strength thanks to its high tensile strength. 4140 is a medium-carbon (nominal 0.40%C) chromium-molybdenum alloy steel that is most often oil quenched to attain an as-quenched hardness ranging from about 54-59 HRC (as quenched), depending on the precise carbon content (which affects the hardenability of the material). Applications of Grade 4140 Quench +Tempered Medium-high stressed 4140  shafts and components where the use of carbon steel 1045 would not be appropriate. Reasons for using 4140 are the higher yield and fatigue strength, better through hardening of the material and superior impact properties compared to plain carbon steels like 1045. These advantages are only achieved when 414...

  CK45 round steel bar   general purpose medium carbon steel delivered in as  hot rolled   condition. It can be further heat treated to achieve specific mechanical properties. The 0.45% carbon content is not favorable for welding. However, it can be weld with appropriate pre and post weld heat treatment. Surface hardness of 57~62 HRC can be achieved with cast hardening to a depth of approximately 1mm. Used for most transmission and motor parts of medium strength. Case hardened parts such as camshafts, gears, rocking levers etc. Simple hand tools and various types of fasteners and fixtures, machinery parts and components with medium stress. INFORMATION OF  CK45 CARBON STEEL ROUND BAR CK45 CARBON STEEL ROUND BAR CHEMICAL COMPOSITION C Mn Si Cr Ni Mo P S 0.42-0.50 0.50-0.80 0.40 0.40 0.40 0.10 0.035 0.02-0.04 HOT WORK AND HEAT TREATMENT TEMPERATURES  Forging Normalization Subcritical annealing Isothermal annealing Hardening Tempering 1100~850* 840~880 650~700*...