DATONG HYDRAULIC/Chrome Plated Bar/Cylinder Piston Rod/Hard Chrome Rod/Quench and Temerped Rod

Comments

Post a Comment

Popular posts from this blog

What is the process of hard chrome plating?

Image
  Hard chrome plating   is a process in which a layer of chromium is applied to a surface to improve corrosion and abrasion resistance, reduce friction, and extend the life of parts used in extreme wear conditions. Hard chrome plating demonstrates excellent hardness and lubricity, and is the premier engineering choice to reduce friction, minimize wear and prevent galling. These characteristics are applicable for critical engineering applications, including: machine tool cutting surfaces, cylinder bores, strut rods, crankshafts and  hydraulic shafts . Hard chrome is also applied to molds because of its low surface energy and resultant release properties. Chem Processing can hard chrome plate steel, aluminum, or copper materials, as well as many exotic alloys. Hydraulic cylinder rods , bearing fits and seal areas frequently get damaged and worn from heavy use. When no longer functional, a part can be hard chrome plated and polished or ground back to OEM Spec. This process c...
Read more

The Induction Hardening Of AISI 4140 Chrome Bar

Image
 As we all know , When the specific pressure in service is very high or there is a risk to damage the chromium plated surface by shocks or abrasions, it is advisable to use the induction hardened AISI 4140 chrome bars . In this case the chromium overlay receives a better support by the hardened base material and is, therefore, less delicate. Why Induction Hardening? Our controlled induction hardening process ensures: Targeted Hardening: Only the working surface is hardened (HRC 58-62), preserving core ductility. Uniform Case Depth: Precise electromagnetic induction achieves consistent case depth (0.8–1.2 mm), mitigating distortion risks. Thermal Efficiency: Faster than traditional furnaces, with minimal decarburization. The Technical of AISI 4140 Chrome bars Material Composition & Performance. 4140 Alloy Steel: A chromium-molybdenum steel (0.75–1.00% Cr, 0.15–0.30% Mo) offering exceptional tensile strength (≥980 MPa) and torsional rigidity. Chrome Plating: A 50-100 µm thick chr...
Read more

WHAT IS THE DIFFERENCE BETWEEN CASE HARDENING AND INDUCTION HARDENING?

Image
  Case hardening is a method of hardening an iron alloy that generally has too little carbon in it to undergo sufficient hardening throughout the material. This is usually about 0.5% carbon at the lower limit. Additional carbon-bearing material is packed around the part, then heated until the low-carbon steel becomes a solid solution, allowing the surrounding carbon outgassing from the heated carbon-bearing material to dissolve into the steel to a degree, not unlike dissolving sugar into hot water. Being a solid, and a metal at that, carbon can only dissolve into a low-carbon steel to certain depth, typically no more than 100–200 micrometers. This gives a case-hardened part good surface hardness, but the interior of the part will not harden as well, or at all, depending on the material used. Induction hardening  isn’t really a chemical process like case-hardening, at least not in the same way. Induction hardening uses alternating frequency passing through a coil (the primary) ...
Read more