What is the material of high pressure hydraulic steel tube

 High pressure hydraulic steel tube is designed to convey liquid fluids to among hydraulics components, fittings, valves, flanges, and other tools. It is made of material E355 (ST 52.4) or E235 (ST 37.4). These two grades have different chemical composition. This helps to control the working pressure. 

The hydraulic steel tube is cylinder-like shaped tubing device that when attach to hydraulic systems, allow for the passage of fluids within and among components. The tube standard specifies dimensions for cold drawn finishing and ​seamless precision steel tubes. Cold drawn process provides the hydraulic steel tube with close dimensional tolerances, increase material strength and enhanced machinability. Therefore, hydraulic steel tubes are suitable in high performance piping system application. 

There are two type of material grade for high pressure hydraulic steel tube, ST52.4 and ST37.4. ST52.4 is high tensile strength tube means it has higher permissible working pressures by reduced tube wall thickness, and leading to reduced system overall weight. Please refer to chemical composition for ST52.4 and ST37.4 tube material: 

Chemical Composition (%)

Carbon (C)

Silicon (Si)

Manganese (Mn)

Phosphorus (P)

Sulfur (S)

E355 (ST52.4)

⩽0.22

⩽0.55

⩽1.6

⩽0.045

⩽0.045 

E235 (ST37.4)

⩽0.17

⩽0.35

⩽1.2 

⩽0.045 

⩽0.045

Datong Hydraulic is a professional manufacturer of high pressure hydraulic steel tube with more than 20 years experience. applications in a variety of industries, including oil and gas, waterjet cutting, food processing, petrochemical/chemical, and many others for fluid handling.Please contact us if you have any inquiry.

hydraulic steel tube


Comments

Post a Comment

Popular posts from this blog

40CR ALLOY STEEL SPECIFICATION

  40Cr steel  is a kind of Chinese GB standard alloy steel for engineering and machinery purpose, and one of the most widely used steel grades. For 40Cr material hardness, specifications and equivalent, please see the table below. After quenching and tempering treatment, 40Cr steel has good comprehensive mechanical properties, low temperature impact toughness, low notch sensitivity, good hardenability, and high fatigue strength in cold oil. When water cooling, the complicated shape of the parts is prone to cracks, the cold bending plasticity is medium, and the cutting workability after normalizing is good, but the weldability is poor, should be preheated before welding, and is generally used in the state of quenching and tempering. DATASHEET & SPECIFICATION The tables below list 40Cr alloy steel datasheet and specification including chemical composition, properties and heat treatment, etc. 40CR STEEL CHEMICAL COMPOSITION   Chemical Composition (%) Grade C % Si Mn Cr 40Cr 0.37 – 0.4
Read more

Skiving &Roller Burnishing Tube And Honing Tube

Image
Skiving and roller burnishing tube  process provide high quality hydraulic cylinders with final sizing and creates the desired finish pattern on the interior of tubing or cylinder bores. They are used in the manufacturing of  hydraulic cylinders . Compared to honing process, they are 80-90% saving of machine time which reduces tool costs per meter of tube length and produces super finish surface, with a bore tolerance of IT8, thereby reduces the sealing wear making it ideal for pistons. The skiving tool is a multifunctional tool used in the manufacturing of hydraulic cylinders. Skiving is operated like this: Two thin chips are cut at a high feed rate (1-4 mm/rev) while the tool passes through the work piece. This cutting operation determines the finished diameter and tolerance of the hydraulic tube. Surface finish Ra= 4-10 μm (skiving) Skiving has obvious advantages compared with honing: • 80-90% saving of machine time which reduces tool costs per meter of tube length. • Produ
Read more

What is Hydraulic Ram Cylinder?

Image
  Hydraulic ram cylinders   are typically used to give vertical motion, including lifting loads in a vertical direction. Such a cylinder is also used to provide the motion in a horizontal direction but needs attention and suitable guides to guide the motion. Single-acting hydraulic cylinders that have no pistons but have large  cylinder rod s are called rams. These rams operate exactly like the conventional single acting hydraulic  cylinders. However, they use large diameter rods in place of pistons and piston seals in their designs. Thus, in place of pistons, rams have high-pressure cap-end ports. They also do not have any low-pressure rod-end ports. Rams are generally cheaper than their conventional single-acting cylinders counterparts.
Read more