Honed tubes, SRB tubes, Skived and Roller Burnished tubes for Hydraulic Cylinder

Honed tubes and SRB tubes (skived and roller burnished tubes) are mostly application for hydraulic cylinder and pneumatic cylinder manufacturing, it’s the most important materials of hydraulic cylinder manufacturing. 
Honed tube and SRB tube has very accuracy dimension tolerance and good surface smoothness, so this product is also used in applications where precision dimension or high smooth surface is need.
 

As one of the leading hydraulic cylinder honed tubes suppliers, our honed pipes using our factory’s Annealing Cold Drawn Seamless Tubes (CDS tubes). In order to produce extremely precise ID dimensions and smoothly ID surface, the honing process usually more times than others. 

Honed tube for hydraulic cylinder is ready to use for producing or repairing hydraulic cylinders without any further inner surface processing.
 

PRODUCT STANDARD:

ASTM A513, DIN 2391, DIN 1630, DIN 1629, EN 10216-2, A 519, etc on customer’s request.

SIZE RANGE:

I.D 30 mm to I.D 500 mm (1.5″ – 20″), Wall thickness 3 – 50 mm (1/8″ – 2″)

STEEL GRADES:

Carbon steel Honed tubes:

  • SAE 1020
  • SAE 1026
  • SAE1030/1035
  • E355, E255, E215, E235
  • ST52.3,  ST35, ST52.4, ST37.4

STAINLESS STEE HONED TUBE:

  • SUS 304 / 304L
  • SUS 316 / 316L
  • TP 316Ti

Other steel grades of hone tube /honed pipe is available on customer’s request.


ADVANTAGES

  • High precision tolerances;
    Our honed tube can meet ID tolerance H7, H8, H9, … etc according to the customer’ requirements, and its I.D dimension.
  • Seamless tube with high pressure resistance;
    We only use seamless cold drawn tubes to produce honed pipes, which means our honed tubing can work under higher pressure, thus our honed pipes are more reliable for hydraulic cylinder applications.
  • High Smooth inside surface;
    The roughness of our honed pipe is Max Ra 0.4 microns ID finish .
  • Flexible order quantity: we accept small quantity orders, even if there is only one piece of hydraulic cylinder tubing we can produce and supply.
  • Nice weldability: It’s quite helpful for manufacturing the cylinders.

Comments

Post a Comment

Popular posts from this blog

How to deal with the scratch on the surface of hydraulic cylinder barrel

Image
As we all know,In the process of using the  hydraulic cylinder , the hydraulic cylinder barrel will be damaged,it is common that there will be scratch on the surface of the  honed tube , some customers will ignore these scratches, this to us is not responsible for the cylinder, when a small scratches in the cylinder,we usually take some tips to deal with them. 1.First,  to clean up the oil on the surface of our hydraulic cylinder barrel, then we will use the grinder machine to the surface treatment of the scratched part of our cylinder, at this time we have to grind the surface of the cylinder wall out of swallowtail groove. Although we have cleaned our cylinder at the beginning, at this time we need to clean the cylinder barrel further. At this time, we use anhydrous ethanol to clean the surface of the scratch repair of honed cylinder barrel. 2. We usually use special  repairing adhesive  to solve the scratches on the surface of  hydraulic cylinder barrel ...
Read more

Heat Treatments Of Seamless Steel Tube

Image
Heat treatment of  seamless steel tubes  is a process to improve the properties of metal materials and their products. Depending on the use, the material and its workpiece are heated to the appropriate temperature, insulated, and then cooled in different ways to alter the internal structure to achieve the desired performance. Heat treatment of seamless steel tubes is generally divided into annealing, normalizing, quenching, tempering, failure, chemical heat treatment and vacuum heat treatment. By heat treatment, the efficiency or life of the steel can be improved, and in some cases, more expensive special materials can be used instead of cheaper ordinary metal materials. The basic heat treatment methods of seamless steel tubes mainly include the following four forms: 1. Annealing Annealing is a process in which a seamless steel tube is heated to a slightly higher or lower critical temperature for a period of time (ie, heat preservation) and then slowly cooled. Common annealing...
Read more

HOW TO REPAIR THE HYDRAULIC CYLINDER ROD

  Hydraulic cylinders can be repaired, but you should never attempt these repairs on your own. Although hydraulic cylinders have a simple design, you must be familiar with them in order to efficiently repair them. When a technician performs hydraulic cylinder repairs, they take the entire mechanism apart and reassemble to find the root cause of the issue. COMMON POINTS OF HYDRAULIC CYLINDER FAILURE There are several common points of hydraulic cylinder failure. These include the piston, cylinder rod , seals, and head. PISTON The pistons in hydraulic cylinders are one of the most common points of failure. This is especially true in light-duty applications. The pistons used in light-duty applications are often made from aluminum, which wears out much more quickly than the steel used in heavy-duty applications. When checking pistons for failure, technicians will often measure the diameter of the piston. The piston’s diameter in relation to the bore directly affects the amount of hydra...
Read more