Hydraulic cylinder tube | China Honed Tube Suppliers & Manufacturers

Hydraulic cylinder tube is one typical application type of honed tube. It is made from cold drawn seamless steel tube (CDS tube), by the process of honing or Skiving & Roller Burnishing (SRB tube) on the inside surface. It is widely used to manufacture hydraulic cylinders, so it is known as hydraulic cylinder tube.

As the most experienced hydraulic cylinder tube supplier and manufacturer, we can understand the requirements of our customers accurately, and we can give our suggestions to our customers to help them to choose the right materials and the hydraulic cylinder tube sizes.

Here below are the main features of our hydraulic precision cylinder tubes.

  • Tolerance 

Our cylinder tubes with high accuracy tolerance can be provided by us at premium cost, mostly the tolerance of the honed tube ID is ISO H8; and we also can manufacture hydraulic cylinder tubes with ID tolerance H7 or H9 on customer’s request.

  • Ovality 

The ovality of cylinder tube is over the limitations of ID tolerance.

  • Eccentricity  

The eccentricity of honed cylinder tubing is highest 10 percent of the wall thickness based on EN 10305-1.

  • Surface Roughness  

Inner surface Roughness for SRB finished cylinder tubes is Ra = maximum 0.25 µm. for cylinder tubes; and with Honing finished the roughness is Ra = maximum 0.40 µm.

  • Weldability  

Weldability of our hydraulic honed tubes SRB completed or Honed is superb.

  • Machinability 

The machinability of our hydraulic honed tubes SRB completed or Honed is superb.

  • Ready to use 

Our factory’s honed cylinder tubing is prepared to use to manufacturing hydraulic cylinders without additional inside diameter processing.

SIZES OF HYDRAULIC CYLINDER TUBES

As one of the leading honed tube suppliers, all honed cylinder tubing of our factory is offered in both metric and standard sizes and may be cut to length to meet customers’ requirements.

The size range of our hydraulic cylinder tubes: metric size ID. 30mm – 1500mm, wall thickness 4 mm -32 mm. or standard size 1.0″ ID – 20.0″;  wall thickness 1/8″ – 1″.

MATERIALS

As one of the main hydraulic cylinder honed tube suppliers and manufacturers, our factory produces honed precision cylinder tubes in full range of steel grades, such as SAE 1020, 1026, St 52, ST52.3, st 52.4, ST35, ST37.4, E255, CK 35, China 20# steel, China 45# steel, and so on.

Besides Honed Tubes, Our Datong Hydraulic also manufacture hydraulic cylinder chrome plated bar,hollow chrome bar,induction hardened chrome bar.we had become one of the most famous hydraulic cylinder tube  and rods suppliers,manufacturers in the market.

hydraulic cylinder tube

Comments

Post a Comment

Popular posts from this blog

How to deal with the scratch on the surface of hydraulic cylinder barrel

Image
As we all know,In the process of using the  hydraulic cylinder , the hydraulic cylinder barrel will be damaged,it is common that there will be scratch on the surface of the  honed tube , some customers will ignore these scratches, this to us is not responsible for the cylinder, when a small scratches in the cylinder,we usually take some tips to deal with them. 1.First,  to clean up the oil on the surface of our hydraulic cylinder barrel, then we will use the grinder machine to the surface treatment of the scratched part of our cylinder, at this time we have to grind the surface of the cylinder wall out of swallowtail groove. Although we have cleaned our cylinder at the beginning, at this time we need to clean the cylinder barrel further. At this time, we use anhydrous ethanol to clean the surface of the scratch repair of honed cylinder barrel. 2. We usually use special  repairing adhesive  to solve the scratches on the surface of  hydraulic cylinder barrel ...
Read more

Heat Treatments Of Seamless Steel Tube

Image
Heat treatment of  seamless steel tubes  is a process to improve the properties of metal materials and their products. Depending on the use, the material and its workpiece are heated to the appropriate temperature, insulated, and then cooled in different ways to alter the internal structure to achieve the desired performance. Heat treatment of seamless steel tubes is generally divided into annealing, normalizing, quenching, tempering, failure, chemical heat treatment and vacuum heat treatment. By heat treatment, the efficiency or life of the steel can be improved, and in some cases, more expensive special materials can be used instead of cheaper ordinary metal materials. The basic heat treatment methods of seamless steel tubes mainly include the following four forms: 1. Annealing Annealing is a process in which a seamless steel tube is heated to a slightly higher or lower critical temperature for a period of time (ie, heat preservation) and then slowly cooled. Common annealing...
Read more

HOW TO REPAIR THE HYDRAULIC CYLINDER ROD

  Hydraulic cylinders can be repaired, but you should never attempt these repairs on your own. Although hydraulic cylinders have a simple design, you must be familiar with them in order to efficiently repair them. When a technician performs hydraulic cylinder repairs, they take the entire mechanism apart and reassemble to find the root cause of the issue. COMMON POINTS OF HYDRAULIC CYLINDER FAILURE There are several common points of hydraulic cylinder failure. These include the piston, cylinder rod , seals, and head. PISTON The pistons in hydraulic cylinders are one of the most common points of failure. This is especially true in light-duty applications. The pistons used in light-duty applications are often made from aluminum, which wears out much more quickly than the steel used in heavy-duty applications. When checking pistons for failure, technicians will often measure the diameter of the piston. The piston’s diameter in relation to the bore directly affects the amount of hydra...
Read more