Datong Hydraulic

  Tie rod hydraulic cylinders   are not as complex in terms of design as welded body cylinders. Tie rod hydraulic cylinders use high-strength  threaded steel rods  in order to hold the end caps to the  cylinder barrel . Small bore cylinders typically have four tie rods whereas larger bore cylinders can have as many as twenty tie rods in order to withstand the forces produced by the cylinder. Tie rod cylinders have been a go to for most agricultural applications for over 50 years. The hydraulic cylinder is used to transform the hydraulic fluid. energy into mechanical – output energy of the component. A hydraulic cylinder is a positive displacement motor of reciprocating motion. Hydraulic cylinders are widely used in the mobile and other technological industries. It’s low cost to manufacture and the fact that it isn’t welded makes it affordable for anyone needing a cylinder. Magister threaded double-acting tie rod hydraulic cylinders offer a heavy-duty design, cap...

  Telescopic hydraulic cylinders , sometimes called multi-stage cylinders, are a type of linear actuator consisting of a series of tubular rods called sleeves. The sleeves (usually four or five) sequentially decrease in diameter and are nested inside of each other. Once hydraulic pressure is introduced to the cylinder, the largest sleeve (called the main or barrel) is extended first. Once the barrel has reached its maximum stroke, the next sleeve, usually referred to as a stage, begins to extend. This process continues until the cylinder reaches its last stage, called the plunger. There are two different types of telescopic hydraulic cylinders— single-acting cylinders  and double-acting cylinders. Single acting, by far the most common, work by using gravity or some other external force to retract the stages of the cylinder. As soon as pressure is released from the cylinder, the force of the load pushes oil out of the system and the cylinder retracts. While pneumatic telescopic...

Hydraulic Cylinder Tube ST52 and ST52.3 with excellent machinability and weldability. Supplied seamless or welded, cold drawn & stress relieved (BK+S), with yield strength over 520 MPa. The inside diameter is honed and oiled with the tube ends capped for Protection. TYPICAL APPLICATIONS: Hydraulic and pneumatic cylinders for mining, agricultural and farm machinery, hoists, automotive and transport lifting equipment, waste disposal transport, food processing equipment, mechanical tools and equipment, compressors and earth moving equipment etc.   MACHINABILITY: Excellent machinability in the BK+S (as supplied) condition WELDING: By any of the standard welding processes As a professional hydraulic cylinder tube manufacturer and supplier, Datong Hydraulic has been supplying and exporting honed tube for almost 20 years.